4
①
②
③
How to use the Dual Jet High Speed Hand Dryer
Dry your hands about "7" seconds
Stretch out both hands and
insert them all the way in.
Until the air blow your fingers
Pull them back slowly
Before starting to use
Turn on the power switch.
The power indicator lights up.
The lamp lights up.
The functional indicator lamps light.
Using the Unit
Using methods
Special reminder:
The heating wire will starts
automatically when the
ambient temperature is
below 20 degrees. The
heating will be cut off
automatically, when the
a m b i e n t t e m p e r a t u r e
exceeds 20 degrees. If
the hot air is needed,
then press the forced
heating to start it.
Stretch out both hands
and insert them all the
way in. The unit starts
to run automatically.
Pull them out slowly,
letting the air blow the
water off.
Pull them out completely.
Stay 6 - 7 seconds.
Part Names and indicator descriptions
3
Power switch: Press the Power switch, turn ON
the power supply, power indicator lamp
lights
up.
Press this switch for 3 seconds, turn OFF
the power supply.
Air Speed switch: Press the Air Speed switch,
high speed and low speed switches are
changeable. Power indicator
lamp is red when
the high speed switch is turned on, while the
power lamp is green when the low speed switch
is turned on.
Water level indicator:
when the drain water
reaches the full line, the lamp lights, reminding
you to empty the water.
Forced Heating switch: Press the Force Heating
switch, the indicator lamp is red, without
considering the ambient temperature.
Switch and Indicator descriptions
Operating switch
Start sensor
panel
Air filter (Air inlet)
Water tank
Features:
“
No touch
”
hand drying ensures superbly hygienic.
The high-speed streams of
air blow
your
wet hands
fast, economical of money for paying electric charge.
A tamper-proof timer is equipped to prevent overuse.
No need paper and towels, simple and easy
maintenance.
No pollution, adopting the antibacterial material.
The
Deodorant
Box
can
be
added.
If the Deodorant
function
is
needed,
the
Deodorant Box is separately
bought.
The lamp flashes, when the
drain
water reaches the
full line, reminding you to empty the water.
To prevent overusing the unit, the built-in timer will
stop the unit after 30 seconds automatically.
