Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
11
The momentary function only ap-
plies to buttons and allows a button
to activate only when the user holds
the button down. It will not remain
active once pressure is released.
Ignition/Day/Night: These buttons in
the software can only be used for their
respective functions. Please refer to
the wiring diagram on pages 8 & 9 for
wiring examples.
8. Siren
This function only works when you
have a 100W or 200W Storm siren
connected. Select the desired
switch (input, slide, or button),
then select the tone from the drop
down menu. If using a 100W siren,
only select speaker 1. For 200W
sirens, make sure to highlight
speaker 1 and speaker 2.
9. Audio
(under siren section)
This function only works when
you have a 100W or 200W Storm
siren connected. This function
allows any input, slide switch or
button to activate a desired audio
tone. Select the desired switch
(input, slide switch, or a button)
then select the audio tone from
the drop down menu. If a 200W
Storm siren is installed, the audio
tones will always play on both
speakers. For example: Tone 1
programmed on speaker 1 will
play through both speakers #1
and #2 on a 200W siren.
PROGRAMMING SOFTWARE
