Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
5
1. Mount the U-Shaped Bracket in
the desired location using 2 self-
tapping screws. If you wish to use
machine screws, simply drill out the
required hole size based on the size
of screw choice.
Important! Make sure not to dam-
age any vital parts of the vehicle or
mounting surface. Do not mount
anywhere that interferes with the
vehicle air bag.
2. Re-attach the control panel head
to the U-Shaped bracket utilizing
the factory provided screws.
3. Connect the RJ45 cable to the
RJ45 port located on the rear of the
controller.
MOUNTING INSTRUCTIONS
4200 Controller
U-Shaped Bracket