Copyright by FENECON GmbH
Wiring within the Rack
in case a submaster BMS is installed
5
Wiring: Submaster BMS + first battery module
22
To last battery module
of the string port " + "
DC-cable black 410 mm - 25 mm²
Connector black/black for connection from
master BMS port "MODULE -" to module 1 (first
module below BMS box) port " - "
Kommunikationskabel 410 mm
RJ45 Anschlüsse zur Verbindung vom Master
BMS Anschluss „
MODULE OUT“
zum
Batteriemodul 1 (erstes Modul unterhalb der
BMS-
Box) „
MODULE IN“
Resistor gray for plugging into the "PARALLEL OUT"
connector in the submaster BMS
The DC cable 410 mm and the communication cable 410 mm
are in the box of the submaster BMS box.
The resistor is in the box of the master BMS box.
