FENDT MAN D 0836 LE, Workshop Manual, Page: 62 / 144

Fav 900
Engine / Cooling system
Removing and refitting coolant pipe
G
Repair
Fav 900 chassis number 23/3001 and up
14.02.2001 2050 000004 G a 1/1
Capitel Docu-No. Index
Date Version Page
Removing and refitting coolant pipe
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Removing the coolant pipe
Drain coolant while engine is cold. Use a clean
pan with sufficient capacity
● Remove injection lines
●
Remove intake pipe
●
Disconnect temperature sensor
PMTAB_Picture
Unscrew and remove coolant pipe.
Remove gasket and clean all sealing faces.
PMTAB_Picture
Refitting the coolant pipe
Replace O-Rings of connecting pipe. Fit coolant
pipe using new gaskets.
PMTAB_Picture
Insert screws and tighten to specified torque.
Note:
Insert the longer screws into the brackets for
injectors.
●
Reconnect temperature sensor,
●
Refit intake pipe.
●
Refit injection lines.
●
Fill up with coolant.