Fav 900
Engine / Injection Pump
Checking Start of Delivery VP 44
E
Testing
Fav 900 Chassis Number 23/3001 and up
01/2000
2710
000003
E
b
4/7
Capitel
Docu-No.
Index
Date
Version
Page
Checking Start of Delivery VP 44
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Important:
Do not loosen first visible screw (M8) (TDP
Screw).
PMTAB_Picture
Turn crankshaft using the actuation tool and
loosen the visible screws 2,3 and 4 .
PMTAB_Picture
Set first cylinder (fan side) using the actuation tool
onto TDP (arrow).
PMTAB_Picture
Important:
1. Cylinder (fan side) is in TDP Position, when
the flat part of the control shaft can be
recognized through the TDP measuring hole.
If the flat part cannot be recognized , turn the
crank shaft further 360
°
with the actuation tool
in order to place the flat part of the control
shaft in frontt of the measuring hole.
Valves of the 6th cylinder (flywheel side) are in
middle position.
