Important Safety InStructIonS
This symbol warns the user of dangerous voltage levels localized within the
enclosure.
This symbol advises the user to read all accompanying literature for safe operation
of the unit.
∆
Read, retain, and follow all instructions. Heed all warnings.
∆
Only connect the power supply cord to an earth grounded AC receptacle in accordance with the
voltage and frequency ratings listed under INPUT POWER on the rear panel of this product.
∆
WARNING:
To prevent damage, fire or shock hazard, do not expose this unit to rain or
moisture.
∆
Unplug the power supply cord before cleaning the unit exterior (use a damp cloth only). Wait
until the unit is completely dry before reconnecting it to power.
∆
Maintain at least 6 inches (15.25 cm) of unobstructed air space behind the unit to allow for
proper ventilation and cooling of the unit.
∆
This product should be located away from heat sources such as radiators, heat registers, or
other products that produce heat.
∆
This product may be equipped with a polarized plug (one blade wider than the other). This is
a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to
replace your obsolete outlet. Do not defeat the safety purpose of this plug.
∆
Protect the power supply cord from being pinched or abraded.
∆
This product should only be used with a cart or stand that is recommended by the
manufacturer.
∆
The power supply cord of this product should be unplugged from the outlet when left unused
for a long period of time, or during electrical storms.
∆
This product should be serviced by qualified service personnel when: the power supply cord or
the plug has been damaged; or objects have fallen, or liquid has been spilled onto the product;
or the product has been exposed to rain; or the product does not appear to operate normally or
exhibits a marked change in performance; or the product has been dropped, or the enclosure
damaged.
∆
Do not drip nor splash liquids, nor place liquid filled containers on the unit.
∆
CAUTION:
No user serviceable parts inside, refer servicing to qualified personnel only.
∆
Fender® amplifiers and loudspeaker systems are capable of producing very high sound
pressure levels which may cause temporary or permanent hearing damage. Use care when
setting and adjusting volume levels during use.
∆
Hazardous voltages may be present within the cabinet even when the power switch is off and
the power cord is connected. Therefore, disconnect the power cord from the rear panel power
inlet before servicing. The power inlet must remain readily operable.
FCC COMPLIANCE STATEMENT:
This equipment has been tested and found to comply with the
limits of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna. •Increase the separation between the equipment and
receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. •Consult the dealer or an experienced radio/TV technician for help.
ENGLISH - PAGES . . . . . . . . . . . 6-7
ESPAÑOL - PAGINAS . . . . . . . 8-9
FRANÇAIS - PAGES . . . . . . . . . . 10-11
ITALIANO - PAGINE . . . . . . . . 12-13
DEUTSCH - SEITEN . . . . . . . . . . 14-15
PORTUGUÊS - PAGINA . . . . . . . 16-17
. . . . . . . . . . . . . 18-19
Summary of Contents for Vibro Champ XD
Page 1: ......
