fender.com
fender.com
6
6
Passport® 150 Pro
Passport® 150 Pro
System Set-Up
System Set-Up
Congratulations on your purchase of a Fender® Passport® 150
Pro audio system. Your Passport is a self-contained, portable
audio system that includes everything you need for great sound
anywhere you go!
Carry your Passport as you would a suitcase. When you arrive,
simply flip open the cabinet release latches and inside you'll
discover two full-range speaker cabinets, a powered mixer, plus
all the cables you'll need to get started. Use your Passport as
a public address system or to amplify musical instruments and
singing. You can connect a music playback device such as a CD
player, MP3 player or even a computer audio interface to provide
accompaniment. The Passport's quick and easy set-up, its ability to
cover large audiences and its simple operation are the hallmarks of
this innovative product.
The Passport's control panel features both mono mic/line channels
and stereo line channels with a variety of input jacks to provide you
with superb flexibility in making connections. You'll find the digital
Reverb effect helpful for creating a warmer sound.
Don't forget to visit www.fender.com/passport
www.fender.com/passport to see a full line
of Passport accessories including wireless microphone systems,
speaker stands, customer support and much more!
1.
Flip open the cabinet latches on the sides of the
Passport and detach the speaker cabinets from the
powered mixer section.
2.
For optimal results, elevate the speaker cabinets on
Passport Speaker Stands or on sturdy tables and
place the speakers far apart to maximize stereo
separation. Position the mixer close to where you
will be performing so you will have easy access to
the control panel.
3.
Open the storage
compartment on the
rear of the mixer and
remove the power
cord and speaker
cables.
NOTE:
The back wall
of the storage com-
partment features a
docking connector
for a Passport UHF
Wireless Microphone
System.
4.
Plug the speaker cables into the left and right
speaker jacks on the back of the mixer, then
connect the corresponding left and right speakers.
Make sure the power switch is off, then plug the
supplied power cord into the power socket on
the back of the mixer and the other end into a
grounded AC power outlet.
225W
INPUT POWER
T4A H
250V
FUSE
ON
OFF
220-240V~
50/60Hz
100-120V~
50/60Hz
LEFT
RIGHT
SPEAKER OUTPUTS
150W total
4
½
MIN 75W
Use only with supplied
4 ohm speakers
Summary of Contents for Passport 150 Pro
Page 1: ......
Page 34: ...Notes Notes fender com fender com 34 34...
