Fender MUSTANG FLOOR, Quick Start Manual

Page: 6 / 16

MUSTANG ™ FLOOR
中文 中文
Introduction
The Mustang™ Floor is a versatile multi-effects pedal that
promises high performance in a variety of situations.
It works well in front of a guitar amp, direct into a PA
system, as a direct-to-digital recording device, with a
power amp + speaker setup, and even makes a fantastic
headphone practice station. Mustang Floor also offers
near-endless control and customization of effects, amp
models, and expression pedal parameters.
Features include:
• 100 fully customizable presets with dozens of built-
in effects, amplifier models and speaker simulation
options.
• Fully integrated with Fender® FUSE™ software which
allows you to configure and operate the Mustang Floor
with ease from your computer. You can use Fender
FUSE to download free presets from Fender artists;
backup and restore presets for different occasions;
and share your Mustang Floor presets with the Fender
community.
♫
SYSTEM REQUIREMENTS: Fender FUSE is compatible
with PC computers running Windows XP or above and
Mac computers with Intel® processors running OSX
version 10.5 (Leopard) or above. Download the latest
version of Fender FUSE software, free of charge, from
fuse.fender.com
. Please also download the Fender
FUSE owner’s manual and turn to the Mustang Floor
section for instructions on how to get the most out of
using the Mustang Floor with Fender FUSE.
• Fender FUSE software also allows you to rearrange the
order of effects in the signal path, update the firmware
on your Mustang Floor and many other bonus features
not available from the Mustang Floor alone.
• Dual-mode footswitch buttons allow you to select
presets in one mode and bypass effects in the second
mode. Connect an MS-4 four button footswitch
(optional, P/N 0080996000) to have additional features
available such as Quick Access preset selection and to
reduce the need to switch between footswitch modes.
• Dual-mode expression pedal allows you to control
master volume in one mode and almost any amp or
effect parameter in the second mode. Connect an
EXP-1 expression pedal (optional, P/N 2301050000) to
use as a primary or secondary expression pedal and
to reduce the need to switch between Mustang Floor
pedal modes.
• Tap/Tuner footswitch button allows you to tap in delay
times and modulation rates or you can activate the
onboard guitar tuner.
• Insert loop jacks for connecting external mono effects
devices through the Mustang Floor.
• Auxiliary input jack for connecting your MP3 or CD
player for accompaniment.
• Phones jack for connecting headphones, ear buds,
or powered speakers. This jack may also be used as a
stereo recording output.
• USB port for digital audio output to your favorite
recording software on your computer.
• Unbalanced line outputs for mono or stereo output to
a guitar amplifier.
• XLR out jacks for professional low-noise stereo
connections to soundboards and recording equipment.
• MIDI compatible. Allows remote selection of presets
using program changes and parameter control with
continuous controllers.
Getting Started
USB EXP-1/
MS-4
GROUND
LIFT
PHONES AUX IN XLR OUT LEVEL UNBALANCED OUT MIDI R L
R L
OUT IN
INSERT LOOP INPUT POWER
SEND RETURN
I
0
1 2 3 4 5
The basic Mustang™ Floor setup:
1.
Plug the supplied power adapter into a grounded
outlet.
2.
Plug your guitar into the INPUT jack.
3. Connect the L UNBALANCED OUT jack to the INPUT
on your amplifier –OR– plug your headphones into
the PHONES jack.
4. Press the POWER switch to turn the Mustang Floor
ON (1).
5. Turn the LEVEL knob to at least halfway up.
6.
Turn on your amplifier –OR– put on your headphones.
7.
Make sure you are in Play mode (press the EXIT button
if it is lit up) then spin the big Data Wheel to audition
the various presets!
8.
Download the
Advanced Owner's Manual
from
www .fender .com/support
for step-by-step instruc-
tions on using all the amazing features found on your
Mustang Floor.
6
f e n d e r . c o m