29
Comment:
• If the connection is not enabled after 15 seconds, try again. Using
select Stop
WiFi Config and press
Config mode stopped message appears on GW100; sub-
sequently proceed as per Point 3.
• Configuration process may be stopped at any time by pressing
.
Your device may now be activated and managed on the web browser or in the mobile applica-
tion. For this, MAC address and Pin, unique codes for your GW100 device, are required. These
may be found in the package contents (label on the back of this manual and in the product
box). This information must be kept safe for the next login of the gateway to another user
account or for any configuration change.
It is also possible to turn off the browser on the mobile phone; this page is already disconnected
from GW100.
