26
12.4 Device information -
It displays system information (manufacturer, firmware version, backup battery and power
supply adapter voltage).
13. Wi-Fi CONNECTION
Mobile phone with Internet connection that is capable reading the QR code with the camera
or with application for reading QR codes is required. GW100 installation site must have good
Wi-Fi cover.
2.
In order to create a new connection, the SSID line must be blank; if yes then proceed as per
Point 3 If no, using
select Reset SSID line in the pop-up window,
then using
select Yes and press
. In approximately 10 to 15 seconds, the
Reset SSID line will change to Configure WiFi and the SSID line will be blank.
1. Wi-Fi module settings
By holding down
displayed on the overview or detail screen selection appears.
By using
select WiFi Setup, press
.
