background image

12

9. DEVICE MANAGER - PAIRING DEVICE

Device Manager is used for pairing, editing and deleting devices (energizers and monitors) in 
the gateway.

» Pairing Device - 

Pairing is the process of linking communication between two devices. The gateway 
GW100 can pair up to twelve different devices. The device can be renamed individually.  

If all positions are occupied, it is not possible to start a new pairing!

9.1 Pairing new device - energizer

To select pairing, press and hold  

 .

1. 

Use the arrows  

  

to move to Pairing and by press the  

 

  key you will get to 

the Device Manager where you work with the device.

2. 

Switch the energizer to pairing mode - Switch on energizer and then switch it off with 

one short press. Then press and hold the button (> 5 seconds), until the LED flashes 
very quickly. Now is energizer in pairing mode. Place the device close to Gateway.

3. 

By arrows  

  

move the cursor to an empty item 

4. 

Short press of  

 

  key we confirm the chosen item.

5. 

The correct selection of the action is confirmed by the 

Pairing new device

 information

screen.

Summary of Contents for GW100





































Reviews: