Fema Electronica K40-CR, User Manual

Page: 4 / 28

FEMA ELECTRÓNICA . Series K . K40-CR
4
1.2 Included functions
Functions included Section
Fast access yes, configurable 1.12.5
Preset yes, configurable 1.12.1
Reset
yes, configurable : front,
rear and/or linked to
alarm activation
1.7
Counting direction up or down 1.12.1
Memory yes, recovers at power-up
Functions ‘on alarm’ yes 1.12.4
Special functions
control up / down
cycle counter
accumulated counter
exceeded counter
hold control
memory for ‘shorter cycle’
and ‘longer cycle’
1.12.2
‘On Power Up’ yes
1.12.2
Password blocks configuration 1.12.9
Alarms
activation delay
deactivation delay
inverted relay
locked deactivation
1.12.4
Display brightness 5 levels
1.12.12
Table 1 - Functions included
Earth connection - Although a
terminal is provided for earth
connection, this connection is
optional. The instrument does
not need earth connection for
correct operation nor for com -
pliance with the security regu -
lations.
~
~
+
-
8 9 0
Fuse - To comply with security regulation 61010-1, add to the power
line a protection fuse acting as disconnection element, easily acces -
sible to the operator and identified as a protection device.
Power ‘H’ fuse 250 mA time lag
Power ‘L’ fuse 400 mA time lag
1.3 Power connections
Button ‘LE’
1.4 Front view
Button ‘UP’
Logo
Alarms
Units
Button ‘SQ’
‘Configuration menu’
(see section 1.12)
‘Fast access‘
(see section 1.12.5)
Front reset
(see section 1.12.7)
Controls
(see section 1.6)
Option 1 Option 2 Option 3
Power
(see section 1.3)
Detail of the plug-in screw terminals provided with
the instrument. The instrument is provided with all
terminals needed, both male and female.
1.5 Rear view
Control led*
* The ‘led control’ is operative only in counting modes that do not
display seconds or tenths of second. It flashes ‘on’ and ‘off’ at a rate
of 1 second when instrument is counting (‘start’). It remains ‘off’
when the instrument is not counting (’stop’).
1 2 3 4 5 8 9 0