Fema Electronica K40-CR, User Manual

Page: 13 / 28

FEMA ELECTRÓNICA . Series K . K40-CR
13
1.12 Configuration menu (cont.)
If only a single function is selected for the ‘fast access’ menu, press -
ing the the ‘UP’ (
5
) key will shortly display the function name and
then automatically jump to the function value.
1.12.6 Super fast access
Left zeros
With left zeros
Without left zeros
Password
Factory reset
Version
Minimum
Brightness
Maximum
Standard
Option 1
Configuration menu for the module installed at Opt.1
Option 2
Configuration menu for the module installed at Opt.2
Option 3
Configuration menu for the module installed at Opt.3
The ‘LE’ (
3
) key at the front of the instrument can be configured to
activate several functions. Only one function can be assigned to the
‘LE’ (
3
) key
• the ‘ No function ’ (‘ nonE ’) value assigns no function.
• the ‘ Reset ’ (‘ rSt ’) value asigns the reset funtion to the ‘LE’ (
3
) key.
• the ‘ Reset + Start ’ (‘ r.Str ’) value asigns the reset and start function
to the ‘LE’ (
3
) key.
• the ‘ Alarm unlock ’ (‘ A.Lck ’) value assigns the manual unlock of the
alarms function, for instruments with the ‘ Locked alarms ’ (‘ A.Lck ’)
function activated
(see section 1.12.4)
1.12.7 Menu ‘Key LE’
At the ‘ Password ’ (‘ PASS ’) menu select a 4 digit code to block access
to the ‘
configuration menu
’. Instrument configuration will not be ac -
cessible to non authorized personnel. To activate the ‘ Password ’ se -
lect ‘ on ’ and introduce the code.
The code will be requested when trying to access the ‘ configuration
menu ’ (key ‘SQ’ (
<
)). The ‘ fast access ’ menu is not password pro -
tected.
The ‘ Version ’ (‘ VEr ’) menu informs of the current firmware version
installed in the module.
At the ‘ Brightness ’ (‘ LIGh ’) menu select the light intensity for the
front leds. With this function it is possible to adapt the instrument to
the environment light intensity.
1.12.8 Left zeros
Menus ‘ OPt.1 ’, ‘ OPt.2 ’ and ‘ OPt.3 ’ give access to the ‘
configuration
menus
’ of the output and control modules installed at slots Opt.1,
Opt.2 and Opt.3.
See section
2
for a list of output and control modules available for
each slot. The ‘
configuration menu
’ of each module is described at
the User’s Manual of each module.
1.12.9 Function ‘Password’
At the ‘ Factory reset ’ (‘ FAct ’) menu, select ‘ yes ’ to load the default
factory configuration for the instrument (see section 1.14).
1.12.10 Factory reset
1.12.11 Firmware version
1.12.12 Brightness
The ‘
Left zeros
’ (‘
L.ZEr
’) parameter controls the left zeros on or off.
1.12.13 Access to optional modules
Key LE
Reset
Alarm unlock
No function
Reset + Start