Fellowes Standard Morgana FRN-6, Service Manual

Page: 29 / 67

N U M B E R E R
PAGE 27
M A N UAL
Section 9 CLUTCH ASSEMBLY
9.2 ...... Over-travel - Measurement
The clutch and brake springs have a combined adjustment to
ensure that when the brake spring engages, the clutch spring is
released.
Note ....... This adjustment is critical to the accuracy of the
numbering machine and is measured by the over-travel
which is checked as follows:-
Rotate the output hub (Fig. 9.31) until the brake spring is fully
engaged. (This is the normal stopping position of the clutch).
Operate the actuator without rotating any parts. The stop collar
will spring forward the distance shown in Fig. 9.21 as over-travel.
This adjustment may be checked with the clutch on the machine by
marking the stop collar after completing the two steps above.
The over-travel should be 3mm or 1/8" maximum.
Over-travel Measurement............................................ Fig 9.21
3 mm / 1/8” Over-travel Actuator
Stop Collar