Fellowes Standard Morgana FRN-6, Service Manual

Page: 19 / 67

N U M B E R E R
PAGE 17
M A N UAL
These belts are tensioned by adjusting
the bearing housings after slackening
their fixing bolts.
(see note below)
The fixing bolt nearest to the feeder
end of the machine acts as a pivot
whilst the delivery end bolt runs in a
slot in the side frame and allows
adjustment to be made.
The belts should not be over
tensioned, but note that an under
tensioned belt will cause poor
Section 4 DRIVE BELTS
Motor Drive Belt.......................................................... Fig 4.31
Motor Drive Belt
Adjust Motor to Tension Belt
Motor Fixing Bolts
4.2 ...... Adjustment - Twin Grip and Clutch Drive Belts
registration.
4.3 ...... Adjustment - Motor Drive Belt
The motor drive belts are tensioned by adjusting the motor position
after slackening the motor fixing bolts which all run in slots in the
side frame.
Note ....... On the friction machine, the clutch side bearing housing
is on the outside of the side frame and the clutch drive
Bearing Housing
Fixing Bolts