4
CAPABILITIES
ENGLISH
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO
ensure the machine is on a stable surface.
DO
test laminate scrap sheets and set the machine before final laminations.
DO
remove staples and other metal articles prior to laminating.
DO
keep the machine away from heat and water sources.
DO
turn off the machine after each use.
DO
unplug the machine when not in use for an extended period.
DO
use pouches designed for use at the appropriate settings.
DO
keep away from pets, while in use.
DO NOT
leave the power cord in contact with hot surfaces.
DO NOT
leave power cord hanging from cupboards or shelves.
DO NOT
use appliance if the power cord is damaged.
DO NOT
attempt to open or otherwise repair the machine.
DO NOT
exceed the machines quoted performance.
DO NOT
allow children to use this machine without adult supervision.
DO NOT
laminate sharp or metal objects (eg: staples, paper clips).
DO NOT
laminate heat-sensitive documents (eg: tickets, ultrasounds etc).
DO NOT
laminate with self-adhesive pouches which require a cold setting.
DO NOT
laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A
On / off switch
B
Power on button
C
Temp button
D
Reverse button
E
Carry handle
F
Pouch / document entry slot
G
Entry support shelf
H
Pouch / document exit
I
Illuminated user interface
J
Exit tray
‘Pouch Protection’ function
The machine includes two ‘Auto-reverse’ functions designed to protect the
laminating pouch. When in use, the machine will:
(1) scan the pouch for creases and errors in loading.
(2) to check for blockages debris within the mechanism
When these errors are detected the machine will automatically operate in
reverse for (1) 5 seconds or (2) 20 seconds to eject any pouch.
‘Safe Start’ function
When switched on, the machine has a default ‘Safe Start’ function which
always starts up at the Cold setting. You may select other hot temperature
settings if required. The machine will warm-up and alert the user when it is
ready.
‘Sleep Mode’ function
If the machine is not active for 30 minutes, the ‘Sleep Mode’ function will
place the machine into standby mode. To operate the machine, press the
‘Power On’ button on the control panel.
• For best results, use Fellowes ® brand pouches:
3 Mil, 5 Mil, 7 Mil.
• For self-adhesive (cold pouches) only use the cold setting.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
• When working with different pouch thickness’ (temperature settings) it is
recommended to first start with the thinnest pouches.
FEATURES & TIPS
Performance
Entry width
12.5”
Pouch thickness (min)
3 Mil (per side)
Pouch thickness (max)
7 Mil (per side)
Warm up time (estimate)
minimum 3 minutes
Cool down time
30-60 minutes
Lamination speed (+/- 5%)
approx. 18”/min (fixed speed)
Number of rollers
4
Ready indication
Light & beep
Auto & manual reverse function
Yes
Clear Path / Anti-jam engine
Yes
LED interface
Yes
Sleep mode
Yes (30 minutes)
Photo-capable
Yes
Carrier-free
Yes
Carry handles
Yes
Exit tray
Yes
Technical Data
Voltage / Frequency / Current(Amps)
120V AC, 60Hz, 6.7A
Wattage
800 Watts
Dimensions (HxWxD)
23” x 7” x 5”
Net weight
10lb
Max document thickness
(laminating capacity)
0.03”
E
