Page 5
step 5: insert shroud assemblies over legs
• Slide the shroud assemblies over the legs with the cutout
portion of the shroud toward the front, as shown.
• Lower the shroud all the way down to the motor end of
the legs.
step 6: attach feet to legs
• Attach the feet to the legs using the 4mm Allen key
and four M6x22 socket flat head screws per foot.
• The angled part of the foot faces front, as shown.
Brisa
™
electric table base
assembly
shroud assembly
cutout
faces front
installed
shroud
angled part
toward front
M6x22
socket flat head
4mm Allen key
