Page 2
Please review
these instructions before beginning the installation. Use the illustrations below to check that the all components needed for your
installation were provided with your order. Do not discard the packaging until the product works to your satisfaction.
components and tools
additional tools required
• power drill with assorted drill bits
• Phillips screwdriver
• Phillips #1 and #2 bits
caution
• When drilling holes for the wood screws, guard against drilling through the
top of the worksurface.
• Always check that screws used to attach components to the worksurface
are not too long for the thickness of the surface.
Brisa
™
electric table base
components and tools
work
surface
C48 frame (1)
power cable (1)
cord-organizing
trough (2)
5mm
Allen key (1)
4mm
Allen key (1)
legs with
motor (2)
feet (2)
shroud (2)
leg caps (2)
M6x22 socket
flat head (8)
#8-18x½"
#2 Phillips
flat head (4)
cord clips (10)
M3.5x16
#2 Phillips
flat head (10)
M4x15
#2 Phillips
round head (2)
M4.8x22
#2 Phillips
round head (12)
M4.8x22
#2 Phillips
round head (6)
cam locks (2)
with cotter pin
control unit (1)
M3x18.5
#1 Phillips
round head (3)
motor cable (2)
keypad (1)
M5x15
#2 Phillips
round head (2)
