![background image](http://html.mh-extra.com/html/fellowes/amaris-a3/amaris-a3_manual_550460004.webp)
4
CAPABILITIES
LAMINATOR CONTROLS
A
On / off switch
B
Standby / Power Button
C
Ready Light
D
Pouch selection buttons
(
, 80mic, 125mic, 175mic)
E
Reverse Button
F
Clean Alert System Indicator / Button
G
Carry Handles
H
Pouch slot
I
Entry support shelf
J
Pouch / document exit
K
Exit Tray
ENGLISH
E
DO
ensure the machine is on a stable surface.
DO
test laminate scrap sheets and set the machine before final laminations.
DO
remove staples and other metal articles prior to laminating.
DO
keep the machine away from heat and water sources.
DO
turn off the machine after each use.
DO
unplug the machine when not in use for an extended period.
DO
use pouches designed for use at the appropriate settings.
DO
keep away from pets, while in use.
DO NOT
leave the power cord in contact with hot surfaces.
DO NOT
leave power cord hanging from cupboards or shelves.
DO NOT
use appliance if the power cord is damaged.
DO NOT
attempt to open or otherwise repair the machine.
DO NOT
exceed the machines quoted performance.
DO NOT
allow children to use this machine without adult supervision.
DO NOT
laminate sharp or metal objects (eg: staples, paper clips).
DO NOT
laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot settings.
DO NOT
laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
- Keep away from moving parts.
- This equipment is not suitable for use in locations where children are likely to be present.
- This laminator has a Disconnect Power Switch that must be in the ON (I) position to operate laminator. In case of emergency, move switch to OFF (O) position.
This action will stop laminator immediately.
- Self-adhesive pouches can only be used with the cold setting
.
Performance
Technical Data
Format
A3
Voltage / Frequency / Current(Amps)
A3 = 220-240V CA, 50/60Hz, 5,5A
Entry width
A3 = 324mm
Wattage
A3 = 1200 Watts
Pouch thickness (min)
75 microns
Max document thickness
(laminating capacity)
0.024 ” / 0.6mm
Pouch thickness (max)
175 microns
Warm up time (estimate)
1 minute
Lamination speed (+/- 5%)
approx. 78cm/min (fixed speed)
Number of roller
6
Ready indication
Light (green)
Manual Reverse Function
Yes
Auto Shut - Off
Yes