1.
Lay one Microfiber Pad on flat surface, with two fastener strips facing
upward.
2.
Align Mop Head with Microfiber Pad. Make sure Mop Head is oriented
with Pad as shown, and centered as best as possible (See fi gure 2-A).
3.
Press Mop Head firmly down onto Microfiber Pad. Fastener strips will
adhere to Pad Grips on underside of Mop Head. Pad should now be attached
and ready for use (See fi gure 2-B).
CAUTION:
Use care when handling a recently used Microfi ber Pad, as it may
still be hot.
NOTE:
Microfiber Pads are machine washable. To avoid picking up lint,
washing separately from other fabrics is recommended. Only use liquid
detergent. Avoid using any fabric softeners or bleach. Air drying is
ecommended; machine drying on a low heat or air dry setting is acceptable
as well.
MICROFIBER PADS
The Mop Head and Microfi ber Pads are perfect for use on these hard fl oor
surfaces:
• Sealed Hardwood • Sealed Laminate • Glazed Ceramic • Marble • Tile
• Stained Concrete • Linoleum • Granite • Vinyl
IMPORTANT:
Do not use on unsealed hardwood or unglazed ceramic
surfaces. Surfaces that are not properly sealed may be warped or damaged
by exposure to heat and moisture.
Care should also be taken when steaming sealed hardwood fl oors, as
prolonged exposure to steam in a single spot may cause damage and
discoloration. To avoid this, keep the Mop Head in constant motion on these
surfaces.
Steam may remove the sheen from some fl oors that have been treated with wax.
Extremely rough textured fl oors may tear or damage Microfi ber Pads.
6
