13
Point nozzle towards sink,
tub or ground and shake
while pressing Steam Trigger.
Continue until excess water is
released.
Water
condensation
in Steam Hose.
Excessive amount of
water in steam.
NOTE: Unit produces
wet steam
– it is normal for
steam to contain
some amount of
water.
Filling the Boiler with more
than 48 oz. (1,419 ml.) of water
interferes with steam
production, resulting in water
condensation in steam.
Always fi ll unit with correct
amount of water. (see Page 9
for details)
Boiler has
been
overfilled.
Check to make sure that
accessories are properly
connected, per
procedures on Pages 4-9.
Accessories
not properly
installed.
Accessories do not
stay fi rmlyconnected
to Steam Nozzle.
Replace Microfi ber Pad with a
clean one.
Microfi ber Pad
is dirty.
Floor surfaces appear
cloudy or streaky
after steaming.
Switch to distilled or
de-mineralized water.
Hard water
residue on
floor.
Unit will provide optimal steam
at 2 bar. Normal pressure with
continuous steam flow is
approximately 2 Bar (29 PSI).
Variances in
environmental
temperature
and amount of
water in boiler
could affect
the amount of
pressure your
unit will reach.
Pressure Gauge will
not reach 4
bar (58psi).
Environment friendly disposal
This symbol means that in case you wish to dispose of the
product once its working life has endedT take it to an au-
thorised waste agent for the selective collection of Waste
from Electric and Electronic Equipment ( WEEE ) .
