Felker Mason Mate II, Operating Instructions And Parts List Manual

Page: 51 / 56

51
Diagram 19 – Parts List
7.5 hp / 575V / 3 Phase / 60 Hz Motor
(Ref: Dwg B-182133)
ITEM P/N DESCRIPTION QTY
1 001257 Motor, 7.5hp/575V/3ph/60hz/7.4A 1
2 186252 Motor Starter 1
(Note 11)
3 182024 Strain Relief, 3/4 NPT 3
4 176953 Locknut, 3/4 Conduit 3
5 176933 Sealing Ring, 3/4 Conduit 2
6 182018 Cord, Type SO - 12/4 x 38 (To motor) 3.17 Ft
- 182018 Cord, Type SO - 12/4 x 42 (To plug) 3.50 Ft
7 182021 Terminal Ring, Insulated #10 x 12-10GA 1
8 090556 Connector, Wire, Yellow, 18-10 AWG 3
9 ------ Plug, Customer Supplied 1
NOTES:
11. When replacing the motor starter, adjust the overload protection (remove cover of box) to the same value as
the Full Load Amp Value (Marked on the Motor Serial Number Plate).
7.5 hp / 415V / 3 Phase / 50 Hz Motor
(Ref: Dwg B-182130)
ITEM P/N DESCRIPTION QTY
1 162287 Motor, 7.5hp/415V/3ph/50hz/10A 1
2 190102 Motor Starter 1
(Note 12)
3 182024 Strain Relief, 3/4 NPT 3
4 176953 Locknut, 3/4 Conduit 3
5 176933 Sealing Ring, 3/4 Conduit 2
6 182018 Cord, Type SO - 12/4 x 38 (To motor) 3.17 Ft
- 182018 Cord, Type SO - 12/4 x 42 (To plug) 3.50 Ft
7 182021 Terminal Ring, Insulated #10 x 12-10GA 1
8 090556 Connector, Wire, Yellow, 18-10 AWG 3
9 ------ Plug, Customer Supplied 1
NOTES:
12. When replacing the motor starter, adjust the overload protection (remove cover of box) to the same value as
the Full Load Amp Value (Marked on the Motor Serial Number Plate).