Felker Mason Mate II, Operating Instructions And Parts List Manual

Page: 27 / 56

27
Diagram 4 – Parts List
ITEM P/N DESCRIPTION QTY
1 ------ Cutting Head Assy 1
2 180053 Platform Weldment 1
3 032501 Shim, Brass .005 Thick 1
(Note 3)
4 032502 Shim, Brass .015 Thick 1 (Note 3)
5 032503 Shim, Brass .020 Thick 1 (Note 3)
6 030822 Wheel 3
7 032366 Nut, Keps .313UNC 3
8 020548 Screw, Set Soc Cup Pt #10-24UNC x .375 1
9 030580 Bearing, Head Pivot 2
10 177696 Draw Bolt, 3/8-16UNC 1
11 020199 Locknut, Fiber .375-16UNC 3
12 180054 Shield, Blade Guard 1
13 020301 Capscrew, Hex Hd .250-20UNC x .625 2
14 020195 Locknut, Fiber .250-20UNC 2
15 186215 Handle 1
(Note 4)
16 020380 Capscrew, Hex Hd .375-16UNC x 1.75 2
17 139568 Grip, Handle 1
(Note 4)
18 195023 Blade Shaft Assy w/Outer Flange (Incl Items 19-29) 1 (Note 5)
19 ------ Shaft, Blade w/Hsg Assy 1 (Note 5)
20 195020 Housing, Shaft 1 (Note 5)
21 030004 Washer, Finger Spring 1
22 139273 Bearing w/seal 2
23 195017 Shaft, Blade 1
(Note 5)
24 177973 Collar, Inner 1
25 030951 Outer Collar 1
26 020378 Capscrew, Hex Hd .500-20UNF x 1.00 1
27 020742 Washer, Flat .313 Dia 4
28 020785 Lockwasher, Split .313 4
29 020316 Capscrew, Hex Hd .312-24UNF x 1.00 4
30 ------ Belt Guard Group 1
31 180055 Bracket, Belt Guard, PC Black 1
32 170320 Belt Guard, Yellow 1
33 ------ Belt Guard 1
34 020741 Washer, Flat .250 Dia 6
35 020195 Locknut, Fiber .250-20UNC 6
36 020370 Capscrew, Hex Hd .250-20UNC x .75 1
37 020302 Capscrew, Hex Hd .250-20UNC x .75 3
NOTES:
3. Shims are listed as required to align bladeshaft. Order qty. desired for alignment of a specific saw.
4. Handle and Grip Effective November 1999. Refer to Instruction Sheet 0A7810 for further Information, for
retro-fitting of new handle onto older units. Note that Older Handle (P/N 060390 – Not Shown) is a Straight
Pipe, and is No Longer Available (Replaced with Kit P/N 186218). Older Grip (P/N 043935 – Not Shown), is
for use with P/N 060390 (Old Handle) and is still available.
5. P/N 195023 Blade Shaft Assy Effective S/N 380821 (One Earlier Unit S/N 380814). First Production Unit
Built 04September 2002. Note that new Shaft (Item 23), and Housing (Item 20) ARE NOT for use on units
before the Effective S/N, unless they have had this blade shaft assembly field installed (through Service Parts).
Refer to Instruction Sheet 0A7873 for further information, and how to identify new / old blade shaft and
assembles (due to this change).