Felisatti DC10,8L2, Original Instruction Manual

Page: 20 / 94

20
Do not use the charger under the rain
or when it is wet.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not insert metal wire or any
conductive object through the
ventilating opening of the charger.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not attempt to disassemble the
charger and keep the charger out of
the reach of children.
If the cord of the charger has been
damaged, replace or repair it
immediately.
Using the charger with damaged cord may
cause electric shock.
Specific Safety and Warnings
working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b)Use power tools only with specifically
designated battery pack.
Use of any other battery packs may create a
risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws, or other
small metalobjects that can make a
connection from one terminal to another.
Shorting the battery teminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
e) Do not overreach. Keep proper footing
and balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g)If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be
repaired.
c) Disconnect the plug from the
powersource and/or the battery
pack from the power tool before
making any adjustments,
changing accessories, or
storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these
instructions, taking into account the
Electric shock may cause injury.
Do not use the charger under the rain
or when it is wet.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not insert metal wire or any
conductive object through the
ventilating opening of the charger.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not attempt to disassemble the
charger and keep the charger out of
the reach of children.
If the cord of the charger has been
damaged, replace or repair it
immediately.
Using the charger with damaged cord may
cause electric shock.
Electric shock may cause injury.
Do not throw the battery into the live
fire.
In the fire, the battery may explode due to
high temperature and cause serious injury.
Do not short the terminals of the
battery
If the terminals of the battery is short circuited,
excessive current will flow and fire or
explosion may occur causing serious injury.
Avoid strong impact on the battery
and do not pierce the battery case
with a sharp object.
Fire or explosion may occur causing
serious injury.
Store the battery indoors at 0 ~40
and avoid direct light and closed hot
and humid places.
Fire or explosion may occur causing
serious injury.
Do not make your fingers and hands
touch with the drill bit during
operation.
When your fingers and hands are touched
with the drill bit or caught in it, you may
be injured seriously.
Do not leave the running tool.
Other operators stayed close to you may be
injured.
Set the forward/reverse lever in the
neutral position while you are
changing or operating the tool.
Careless operating of the switch may cause a
serious injury by the rotating part of the tool.
Make sure the battery is attached in
the body of the tool tightly before
you start operation.
When the battery is not attached tightly,
it may be fallen during the operation and
cause an injury in the top of your foot.
Charge only Keyang appoved
rechargeable batteries. Other types
of batteries may burst causing
personal injury and damage
Do not disassemble battery.
Incorrect reassembly may result in a risk of
electric shock, electrocution or fire.
Accessories may be hot after
prolonged use.
When removing the bit from the tool avoid
contact with skin and use proper
protective gloves when grasping the bit or
accessory.
Keep the battery from being
overheated.
If overheated battery is inserted, high
temperature standby is indicated and
charging can only start after the battery has
been cooled down.
When the battery is overheating due to
continuous operation, in order to protect the
battery performance will automatically shut off
the power.
Leaving the battery for a prolonged
time without using it will shorten the
life of the battery.
If the battery is to be stored for a prolonged
time, charge it completely before storing it.
To use the battery for a long period of time,
charge it completely every 3 months.
If drill stalls, it is usually because it is
being overloaded or improperly used.
Release trigger immediately.
Do not click trigger on and off in an attempt to
start a stalled drill. This can damage the drill
.
Wear safety helmet
Wear protective gloves
An explanation of any symbols or
pictograms on the tool relevant to safe use
Wear goggles
Wear ear plugs