Fyetech Electronics Technology
Page | 32
(12)
‘LINK MODE’ SETTING
(i)
Link mode sets the FY41AP to be flown by either RC control or by FY
Data Radio control. „RC‟ is the default Link Mode setting.
(ii)
If you are using an FY Data Radio and Remote Adapter to fly your
airplane, choose “RADIO” instead and press „Set‟ (for details,
please see Remote Adaptor & Data Radio manual):
(13)
INSTALL SETTING
● FY-41AP supports four installation direction.
However, the LOGO
must be installed facing up
.
● FY-41AP has an arrow printed on the top of it. Normally, this arrow
points towards the front (direction of flight).
● If you install the module in any other direction then default forward, you
need to set the module direction via the Install Setting option.
●
Warning:
Failure to correctly set the Install Setting direction will result
in Auto Balance malfunction.
