Fyetech Electronics Technology
Page | 19
VIBRATION DAMPING
a)
FY-41AP is vibration-sensitive equipment. To optimize stabilization &
autopilot function, vibration reaching the unit must be kept at
minimum.
b)
When installing the module, we highly recommend that you use the
supplied vibration absorbing pads as shown below.
These damper pads will greatly reduce vibration reaching the module
and provides adequate damping for most electric & gas/nitro
powered planes.
c)
The algorithm in the FY-41AP compensates for normal levels of flight
vibration. However, if the vibration exceeds the acceptable level,
stabilization will not work normally or may even stop working
altogether.
d)
Install the FY-41AP away from the engine or any other vibration
sources.
e)
Balance your propeller to minimized on board vibration.
