Fyetech Electronics Technology
Page | 43
FAIL-SAFE AND AUTONOMOUS RETURN TO LAUCH
a)
If your RC Receiver / Transmitter has Fail Safe function, please use it. To
ensure your plane returns to you in case of transmission failure, etc., carry
out the following
Fail Safe Settings
:
(1)
Set
SW-2
to go into RTL mode.
(2)
Set throttle failsafe at your plane‟s cruising speed position.
b)
If you are flying via FY-Data Radio and Remote Adapter (refer Data Radio
manual), if the system detects any Data Radio communication interruption
of longer than 5 seconds, the FY41AP will automatically activate RTL.
Therefore no „Failsafe‟ setting is required when flying in this configuration.
c)
MAX DISTANCE SETTING:
(1)
The FY41AP has a Maximum Distance Setting function, which you can
adjust via the Setting Software.
(2)
The Max Distance Setting
will not allow
the plane to fly beyond the
distance you have set. Upon reaching this distance, the FY41AP will
automatically engage RTL and fly back to you.
(3)
The default Max Distance Setting programmed into the FY41AP is 4000
meters.
(4)
This function adds a second level of „Fail Safe‟ for your plane with
FY41AP on board. This will ensure your plane will not „fly away‟ in
case of RC failure or pilot error.
