Feixun FWR-714N User Manual Download Page 44

Page: 44 / 53

Chapter 3: Router Configuration

300Mbps Wireless N Rouer

Setup Wizard

Please find the section of

Setup Wizard

Software Upgrade

Software Update

You can choose to upgrade manually by:

1. Click the

Browse

button to browse the directory where you download the software

upgrade files.

2. Click

Update

button to start upgrade.

Or you can choose to upgrade automatically by click the

Update

button, the router will

download and upgrade automatically from FTP server.

Router will auto reboot when the upgrade finished.

Note:

• Router might be changed to factory default settings after upgrade, please backup in

advance.

• During the updating, please do not turn off the power.

• Please make sure the software version is matching with the existing hardware.

Logout

Click to logout from the router configuration web.

Summary of Contents for FWR-714N






















































Search results

Summary of Contents for FWR-714N

Reviews:

Related manuals for FWR-714N

Brands by name

Popular brands

Feixun FWR-714N, User Manual

Search results

Summary of Contents for FWR-714N

Reviews:

Related manuals for FWR-714N

Brands by name

Popular brands