manualshive.com logo in svg

Feixun FWR-714N, User Manual, Page: 38 / 53

Share
Download
Feixun FWR-714N User Manual Download Page 38

33

Chapter 3: Router Configuration

300Mbps Wireless N Rouer

 IP Bandwidth Control

There are two submenus under the IP Bandwidth Control menu. Click any of them, and you 
will be able to configure the corresponding function. 

•  IP Bandwidth Control Settings

Enable IP bandwidth control: 

If you select it, the bandwidth control rule takes effect.

Total Uplink Bandwidth: 

The rate of uploading through the WAN interface.

Total Downlink Bandwidth: 

The rate of downloading through the WAN interface.

Save: 

Click the Save button to save your setting.

  Note:

•  The bandwidth conversion: 1 Mbps = 1024 Kbps.

•  Select the type of the broadband line and the bandwidth according to the actual 

situation. If you are not sure about the information, consult your broadband provider.

•  After finishing the settings, click the Save button to apply the settings.

•  IP Bandwidth Control List

Enable IP bandwidth control: 

If you select it, the bandwidth control rule takes effect.

Total Uplink Bandwidth: 

The rate of uploading through the WAN interface.

Total Downlink Bandwidth: 

The rate of downloading through the WAN interface.

Bandwidth setting: 

The min. rate can be zero, the sum of all items min. rate should be 

Summary of Contents for FWR-714N






















































Reviews:

No comments