Functions of GT16 transmitter:
4-channel transmitter, accelerator channel, direction channel, AUX2 key channel and
aux1 three-stage switch; st-trim, th-dr, st-dr,st-rev, th-epa and st-epa can be set;
EPA setting function
Trigger conditions:
Start + back + turn right
Function Description:
Take setting forward EPA as an example.
After the EPA setting function is triggered, the red LED light flashes quickly, At this time,
pull the accelerator rocker to make it in the forward position. At this time, Rotate the th trim
knob to adjust the set EPA value. After setting, return the throttle rocker to the center, and
the red LED off, indicating that the setting parameters are completed. The same is true for
other EPA settings.
ST EPA parameter setting range:0% ~ 120%.
TH EPA parameter setting range:0% ~ 150%.
All EPA = 100% by default
Calibration function
Trigger conditions:
Turn on + front + turn right
Function Description:
After the function is triggered, red LED lights flash slowly at the same time. The indicator
enters the calibration state.
Then push and pull the accelerator rocker and select the steering wheel for front, rear, left
and right calibration. The front, rear, left and right calibrations are in no order. After
completing the front, rear, left and right calibration, center the accelerator rocker and runner,
and toggle the st rev switch four times to calibrate the neutral point. After the calibration is
successful, the red LED lights are on in turn, indicating that the machine is turned on normally
and enters the normal working state.
Binding function
Trigger conditions:
Power off + press and hold the power button over 3s.
Function Description:
When the red LED flashes rapidly, it indicates that the transmitter has entered the frequency
matching mode.
