Functions of GT16 2in1
Appearance of GT16 2in1
Frequency matching mode:
Step1: after the receiver is powered on for 3S, the indicator light of the receiver flashes quickly,
indicating that it enters the frequency matching mode;
Step2: When transmitter power off,press and hold the power button over 3s.
Step3: after the frequency matching is successful, the indicator light of the receiver exits the
flash state. When the transmitter automatically exits the frequency matching mode, the
indicator light of the receiver is always on, indicating that the frequency matching is successful.
Receiver LED status:
1)
The receiver receives normal transmitter data, and the LED light is always on, which
can work normally;
2)
The receiver enters the frequency matching mode, and the LED status flashes
rapidly;
3)
The receiver LED short on and long off, and the receiver is in the state of loss of
connection;
Runaway protection
The receiver has out of control protection function, and the setting method is as follows:
When the transmitter and receiver are powered on and in normal communication state, adjust
the th and st of the transmitter to the position where you want to lose control and keep them.
At this time, insert the jumper cap into the F/B of the receiver once, and then pull out the
jumper cap after the LED light of the receiver flashes to complete the loss of control protection
setting.
Set the Parameters
Using the jumper cap to set running mode and battery type.
Battery Type: LiPo/NiMH
，
the
“LiPo” is the default option。
Running Mode
：
F/B/R
and F/R. The “
F/B/R
” is the default option.
