ASW 14-6, 14-6-PC, 14-10, 14-10-PC, 14-14, 14-14-PC
C-SC_CSSM
VERSION 1.0
13-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
22/42
7. Assembly
Fitting the clutch
1. Coat the end of the tool holder and the switch ring (2) with grease (3 21 600 1423 0).
2. Slide the cam ring (1) and the switch ring (2) on to the tool holder.
3. Insert the nine balls (3) [D=4 mm] into the hole on the outer cam ring.
The balls must be inside the cam ring and must not lie inside the hole.
4. Insert the nine balls (4) [D=5 mm] into the recesses on the switch ring.
5. Slide the switch ring (2) on to the cam ring.
Tools:
- Grease (3 21 600 1423 0)
5
1
2
3
2
4
