ASW 14-6, 14-6-PC, 14-10, 14-10-PC, 14-14, 14-14-PC
C-SC_CSSM
VERSION 1.0
13-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
28/42
7. Assembly
Fitting the motor/gearbox unit
1. Position the flange (1) on the motor.
2. Screw down the flange with two Torx screws and the corresponding circlips.
Tighten the screws to 1.1 Nm.
3. If the gearbox falls out, reassemble it in the correct order as shown in the photo.
Tools:
- Torx 10 screwdriver
- Loctite 270
1
1.
2.
3.
