ASW 14-6, 14-6-PC, 14-10, 14-10-PC, 14-14, 14-14-PC
C-SC_CSSM
VERSION 1.0
13-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
13/42
6. Disassembly
Removing the clutch
NOTE
The compensating discs in front of and behind the ball bearing must be replaced in the same position on
assembly. The discs are used to adjust the play between the slide switch and the switch ring on the
clutch.
1. Remove the flange (1) and take the disc(s) (2) out of the flange.
2. Remove the circlip (3).
Use a new circlip for assembly each time.
3. Pull off the ball bearing (4).
Tools:
-Circlip pliers
- Drawing-off socket cap
(6 41 04 150 00 8)
- Ball bearing puller 19 mm
(6 41 07 019 00 7)
3
1
4
2
