TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 4 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
Notes
©
Copyright 2017 by
FEIG ELECTRONIC GmbH
Lange Straße 4
D-35781 Weilburg
Tel.: +49 6471 3109 0
Version:
2021-03-23
This edition replaces all earlier versions.
The specifications in this document are subject to change without notice.
The transmission and reproduction of this document, its use and the disclosure of its
contents are prohibited unless expressly authorised. Infringement of this provision will
result in liability for damages. All rights for any patent grant or registration of a utility model
are reserved.
These assembly instructions are specifically intended for commissioning engineers of the
TST FUF2
or
TST FU3F
controller from FEIG ELECTRONIC GmbH. The installation and
commissioning of the controller shall only be carried out by officially trained electrical experts who
are familiar with the safety standards of electrical drive and automation technology.
The distributor of the machine is solely responsible for the completeness of the operating
instructions for the machine (in this case the door). The operating instructions for the door
controller that is installed by the manufacturer of the door shall be supplied in one of the languages
of the European Community that is accepted by the manufacturer of the machine.
This manual shows only a small range of the controller functions and provides no warranty of
properties. Additional functions and descriptions for individual door functions as well as more
precise specifications for the controller and hazard warnings are available in the main description.
The information in this document has been compiled according to the best of our knowledge and
belief. FEIG ELECTRONIC GmbH does not warrant the correctness and completeness of the
information in this document. In particular, FEIG ELECTRONIC GmbH cannot be made liable
damage resulting from erroneous or incomplete information.
In spite of our best efforts, mistakes cannot be avoided completely and we will always gratefully
accept any information in this respect.
The installation recommendations contained in this document assume favourable general
conditions. FEIG ELECTRONIC GmbH assumes no liability for the proper operation of the
equipment in third-party environments.
FEIG ELECTRONIC GmbH provides no warranty that the information in this document is not
subject to foreign copyrights. By providing this document, FEIG ELECTRONIC GmbH does not
grant any licenses to its own or third-party patents or any other intellectual property rights.
Only the direct contracting parties shall be entitled to warranty claims against FEIG ELECTRONIC
GmbH; warranty claims are non-transferable. The warranty covers only products supplied by FEIG
ELECTRONIC GmbH. We do not accept any liability for the complete system.
The description of the products, their deployment, capabilities and performance specifications will
not be considered as assured properties and are subject to technical changes.