Feig Electronic OBID i-scan RFID-Tunnel, Application Note, Page: 38 / 54

OBID i-scan
®
Application Note RFID-Tunnel
FEIG ELECTRONIC GmbH Page 38 of 54 N70101-2de-ID-B.doc
E N G L I S H
2.2.3 Required Components
To construct the RFID-Tunnel you need the following components:
- Qty. 1 Long Range Reader ID ISC.LR2000-A
-
Qty. 1 Multiplexer ID ISC.ANTMUX
-
Qty. 1 Power splitter ID ISC.ANTPS-B including 3,65m cable
-
Qty. 6 Dynamic Antenna Tuning Board ID ISC.DAT
- Qty. 6 Antenna- cable 1,35m ID ISC.ANTC135
- Qty. 2 Antenna- cable 0,18m ID ISC.ANTSC
-
Qty. 1 power supply ID ISC.NET24-B
-
Power cable, interface cable and connection cable for the DC power supplies (2-wire,
twisted pair)
To calibrate the Reader you will need the software
-
ISOStart Version 7.03 or higher
and for tuning the antennas the service software
- DATuningTool Version 1.00 or higher
on a personal computer running under Microsoft
®
Windows
®
. The service software is included on
the OBID i-scan
®
CD obtained from FEIG ELECTRONIC GmbH or can be downloaded at the
Download Area of the Homepage www.feig.de.