OBID i-scan
®
Application Note
RFID-Tunnel
FEIG ELECTRONIC GmbH
Page 44 of 54
N70101-2de-ID-B.doc
E N G L I S H
3.1.3.2 Jumper Configuration
Jumpers JP1 to JP8 must be set according to the following table.
Table 3: Configuration JP1-8
Jumper Position
In addition, close jumpers JP11 to JP18.
3.1.4 Setting the Antenna Tuner
ID ISC.DAT of antennas must be set as follows:
Table 4: Jumper settings for Antenna Tuner
Function
Jumper
Position
1
Ω
Q resistor
JP1
open
2
Ω
Q resistor
JP2
open
Antenna switch
JP3
open
Verify these settings. More on setting the ID ISC.DAT antenna tuner can be found in the
corresponding installation manual (M40401-xde-ID-B).
Summary of Contents for OBID i-scan RFID-Tunnel
Page 29: ......
