![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-prh100-a/obid-i-scan-id-isc-prh100-a_installation-manual_3906745023.webp)
OBID
i
-scan
Installation
ID ISC.PRH100-A/-USB
FEIG ELECTRONIC GmbH
Page 23 von 29
M10501-3de-ID-B.doc
E N G L I S H
4.2. Reader with USB-interface
The Powersupply follows though the USB-interface (Bus-powered)
The USB-interface must support a current of 500mA (High Powered Hub)
The data rate of the reader is reduced to 1,5 Mbit (USB low speed)
The reader dispose of a fixed connected interfaces cable. Due to the reader is supported through
the interface, no additional connection is required. The pinout of the USB-connector is standard-
ized. The Reader must only be connected to the USB-port of the PC.
IF the reader is used for the first time, it must be registered in the operating system of the com-
puter. For this the instruction "Installation of the OBID USB driver" can be used