![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-prh100-a/obid-i-scan-id-isc-prh100-a_installation-manual_3906745024.webp)
OBID
i
-scan
Installation
ID ISC.PRH100-A/-USB
FEIG ELECTRONIC GmbH
Page 24 von 29
M10501-3de-ID-B.doc
E N G L I S H
5. Control and Display Elements
5.1. LED
The Reader’s LED can be configured through software.
Table 4.1-1 shows the standard configuration of the LED.
Abbreviation
Description
LED green
"RUN "
-
Indicates the Reader software is running properly.
-
Turns on when the Reader is ready.
LED red
„LABEL“
-
Turns on when a label is detected.
LED orange
„INITIALIZING“
- Flashes during Reader initialization after power-up.
Table 5-1: Standard configuration of the LEDs
5.2. Signal
buzzer
The signal buzzer can be configured by the software.
In the standard configuration the signal buzzer will be active if a label is recognised.
5.3. Key
button
The switch of the reader can be configured by the software.
In the standard configuration the serial number of the label will appear after pressing the
key button.