OBID i-scan
®
System-Manual
ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH
Page 15 of 131
H60301-3e-ID-B.doc
Example 5:
COM-
ADR
Separation
Character
Header
UID
Separation
Character
Data-
Blocks
END Character
COM-
ADR
SEP-CHAR
USR1
USR2
USR3
USR4
UID
SEP-CHAR
DB
USR
1
USR
2
USR
3
(Extended Header and tail only for ID ISC.MR/PR/PRH101-A, PRH101-B from firmware version 1.3)
Scan-Mode via USB-Interface (HID-Mode):
If an USB-Reader is set to Scan-Mode the reader works like a keyboard. The data will be transferred
as USB Key Code or as hex-values.
The user defined Sep- and End- Character will be transfered as USB Key Code.
If the number of transmitted user data is too large, only the maximal number of transmitted data will be
sent plus the end character. (see:
3.7. CFG6: Scan-Mode1
)
Note:
•
If configuration protocols shall be sent to the Reader while the Scan-Mode is active, no
Transponder should be within the detection range of the Reader during this time.
•
Only read operations are available with the Scan-Mode.
