OBID
®
classic-pro
Installation
ID CPR50.10-E/-RE
FEIG ELECTRONIC GmbH
Page 29 of 39
M90701-1de-ID-B-FCC.doc
E N G L I S H
8.1. Connections
8.1.1. LSA Connection X2 for TCP/IP Interface
The connection of the ID CPR50.10-E with the Ethernet and PoE power supply will carried out by a
LSA terminal connector X2 on a connection board which will snapped into the housing.
For applying the CAT5 cable on to the LSA connector a special LSA punch down tool must be
used.
Fig. 7: ID CPR50.10-E connection board with LSA terminal X2
There are existing two different ways for the connection of a CAT5 cable, EIA/TIA T568A and
EIA/TIA T568B. The typical color coding is shown in the table below.
X2
Signal
EIA/TIA T568A
EIA/TIA T568B
1
Tx D1+
Green striped
Orange Striped
2
Tx D1-
Green
Orange
3
Rx D2+
Orange Striped
Green striped
4
BI D3+
Blue
Blue
5
BI D3-
Blue Striped
Blue Striped
6
Rx D2-
Orange
Green
7
BI D4+
Brown Striped
Brown Striped
8
BI D4-
Brown
Brown
