OBID i-scan
®
Installation
ID ISC.ANT1400/760-A/B/C
FEIG ELECTRONIC GmbH
Page 30 of 50
M50700-4e-ID-B.doc
4.3.3.2 Jumper Configuration
Jumpers JP1 to JP8 must be set according to the following table.
Table 5: Configuration JP1-8
Jumper Position
In addition, close jumpers JP11 to JP18.
4.3.4 Setting the Antenna Tuner
ID ISC.ANT1400/760-A antennas must be set as follows (JP3 is factory set to closed and must be
opened):
Table 6: Jumper settings for Antenna Tuner
Function
Jumper
Position
1
Ω
Q resistor
JP1
open
2
Ω
Q resistor
JP2
closed
Antenna switch
JP3
open
Verify these settings. More on setting the ID ISC.DAT antenna tuner can be found in the
corresponding installation manual (M40401-xde-ID-B).
