OBID i-scan
®
Installation
ID ISC.ANT1400/760-A/B/C
FEIG ELECTRONIC GmbH
Page 14 of 50
M50700-4e-ID-B.doc
3.3.3 Connecting the Components
The antenna is for the most part pre-wired. Only the antenna cables for the Type B or BL antennas
need to be routed to the main antenna (Type A or C). At 4.2.2.a typical configuration for Type A
and B antennas is shows (4.3.2 for Type C and B antennas). The 24V supply is brought to the
terminal (observe polarity).
Fig. 10: Terminal for 24V supply voltage
The cable routing should be as short and compact as possible regardless of the antenna
configuration. The cables are finally tied together in small loops. Tie the cables as far away from
the antenna conductor as possible. The cables should never be allowed to touch the copper tube.
The coaxial antenna cables have fixed lengths and may not be shortened. Fig. 11 shows a
corresponding cable configuration.
Fig. 11: Cable Wrapping in Antenna Base