Identification
Installation
ID ISC.ANT.U500/270
–GA/-GB UHF-Gate
FEIG ELECTRONIC GmbH
Page 9 of 54
M71060-1e-ID-B
Infra red detection zone of a single gate
(side view)
Infra red detection zone of a single gate
(top view)
Fig. 2: Views of the detection area
The People Counter board and the Infra red Sensor is mounted in the housing of the antenna type
ID ISC.ANT.U500/270-GA.
There is no need of a direct connection from the UPC to the Host. All commands from the Host to
the People Counters are embedded in the Pickyback command of the reader.
Generally, there are two possibilities to get the actual people counter values. Either the Host poll
the People Counter periodically or in the Notification Mode of the reader, the reader send a notifi-
cation protocol at every change.
In Buffered Read Mode, the host poll the UPC by sending protocols. Only, in the Notification Mode,
the reader poll the counter values, automatically, and send data according the reader configuration
to the host.
ISC.ANT.U500/270-GA ISC.ANT.U500/270-GB
