WARNING!
Electricity - Risk of electric shock.
Warning symbol
Use a protection for face
2.2 SPECIAL SAFETY INSTRUCTIONS
Observe the permissible dimensions of logs to be cut (see “Technical Specifications”).
Never cut several workpieces at the same time – and also no bundles containing several individual
pieces. Risk of personal injury if individual pieces are caught by the saw blade uncontrolled. Never
cut log containing the following:
-
ropes
-
strings
-
cords
-
cables
-
wires
Do not overload machine – use it only within the performance range it was designed for (see
“Technical specifications”).
Use this machine outdoor only.
2.3 SAFE WORKING PRACTICE
It is essential all operators are:
-
Adequately trained in the use, adjustment and operation of the machine;
-
Instructed in factors that influence exposure to noise e.g.:
saw blade designed to reduce the emitted noise;
saw blade and machine maintenance.
-
Informed of factors that influence exposure to dust e.g.:
type of material being machined;
importance of local extraction(capture at source);
proper adjustment of hoods/baffles/chutes;
where provided, dust extraction equipment to be switched on before commencing
machining.
It is important that:
-
During operation the machine is standing on level, horizontal ground and that the floor area
around the machine is level, well maintained and free from loose material e.g. chips and
off-cuts;
-
Adequate general or localized lighting is provided;
-
Stock and finished workpieces are located close to the operator’s normal working position.
It is essential for the operator to:
-
Use a push block or push stick to avoid working with the hands close to the saw blade when
using a dual purpose circular sawing machine for firewood/circular saw bench in the saw bench
mode;
-
Wear suitable personal protective equipment when necessary; this could include;
hearing protection to reduce the risk of induced hearing loss;
respiratory protection to reduce the risk of inhalation of harmful dust;
gloves for handling saw blades (saw blades should be carried in a holder wherever
practicable);
-
Refrain from cross cutting logs on a machine in the saw bench mode;
-
Stop the machine running whilst unattended;
07