6. Assemble the inlet and switch component. Put it on the right position and tighten the 4 screws.
7. Assembling finished, clear away tools.
6. OPERATION
Hazard generated by machine defects!
NOTE
: Before Using the Machine, Please check all parts are fixed firmly and follow carefully below
instructions to avoid overturning or moving during the operation!
Sawing
1. Turn on the machine.
2. Wait until the saw blade has reached full speed.
3. Loosen hook and open the cover, put the wood on the rocker. Then lift handle and lower the
cover to close it.
4.loosen the knob to pull out the lever and fix the knob when the intended length is achieved.
11