Feider FSBE3570 User Manual Download Page 14 | Manualshive

Page: 14 / 18

Feider FSBE3570 User Manual Download Page 14

9. DECLARATION OF CONFORMITY

BUILDER SAS

ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France

Tel: +33 (0)5.34.502.502

Fax: +33 (0)5.34.502.503

We hereby declare that the machine described below due to its design and construction as well
as the model marketed by us, complies with the relevant regulations of the EC directives listed
below. In case of modifications to the machine, the present declaration loses its validity.

Designation of the machine: ELECTRIC LOG SAW

Model: FSBE3570

S/N: 20240604097- 20240604104

is in compliance with the provisions of the following European directives:

Machine Directive 2006/42/EC

EMC Directive 2014/30/EU

ROHS Directive 2011/65/EU and 2015/863/EU

Applied harmonized European standards:

EN1870-6: 2017; EN60204-1: 2018

EN55014-1:2017/A11:2020; EN IEC55014-1:2021

EN55014-2: 1997/A2:2008; EN IEC55014-2:2021

EN61000-3-2:2014, EN IEC61000-3-2:2019/A1:2021

EN61000-2-11:2000

EC-type certificate number: M6A 058058 0448 Rev.02
Notified Body: No 0123

The people name holding the technical file

：

Mr. Olivier Patriarca

Cugnaux, 15/04/2024

Philippe MARIE / PDG

14

«
...
12
13
14
15
16
...
»

Summary of Contents for FSBE3570



















Reviews:

No comments