damage the engine or cause a fire risk.
-
Clean your tool, using a damp cloth and a soft brush. Never clean the product with water and
never immerse it in liquid. Never use solvents or detergents as this may damage the plastic parts of
the product.
-
Check all safety
-
Remove possible sawdust blockages at the discharge.
Every 50 hours of operation
-
Check all screwed connections, tighten if necessary (Rocker and rocker stop must remain
movable)
Store the manual close to the machine.
-
Always wait the appliance cool down before storage.
-
Always store the log saw in a dry area.
-
Wipe the log saw clean with a brush. Apply a thin layer of oil using an oily cloth to protect the
machine from rust, before storage.
NOTE:
Always install the transport brace to avoid overturning or falling during the transporting
process! If the replacement of the blade is necessary, this has to be done by the manufacturer or
his agent in order to avoid safety hazard.
Note: If necessary to replace any parts, you can order the spare parts directly or get the
identification data of the spare parts from our Service Center.
8. TROUBLESHOOTING
Warning: In the interests of operational safety, always switch off the saw and remove the
mains plug before carrying out maintenance work.
Problem
Possible Cause
Help
Saw blade gets loose
after turning off the motor
Fastening nut tightened
insufficiently
Tighten fastening nut, M20 left-handed
thread
Motor does not start
a) Failure mains fuse
b) Extension cable defect
c) Connections on the
motor or switch defect
d) Motor or switch defect
a) Check the mains fuse.
b) Replace extension cord
c) Have a mechanic check electrician
d) Have a mechanic check electrician
No motor output turns off
automatically
Overload by dull saw blade,
thermo protection is
triggered
Insert a sharpened saw blade; motor
can be turned on again after the
cooling period
Burns on the cutting
surface
a) Fastening nut tightened
insufficiently
b) Wrong saw blade
a) Insert a sharpened saw blade
b) Insert saw blade with 20 or 28 teeth
for longitudinal cuts
13