5. Take hold of handle bar of the rocker with both hands and lead it evenly to the saw blade; thus
the saw blade is revealed.
6. Push the rocker evenly to ensure the engine speed does not drop.
7. Remove the saw wood from the rocker before putting on the next piece.
8. Unscrew the 2 bolts to open the cover and clean the sawdust.
Safe removal of possible blocking
Unplug the machine when tighten and open the sawdust cover.
Check it and localise the blocking.
Remove the blocking while considering all safety instructions.
Check the machine visually and make sure it is not damaged. In particular, the saw blade must not
show any sign of damage.
7. MAINTENANCE AND STORAGE
-
Warning:
Turn off the machine and disconnect from the power supply before conducting
maintenance work or settings.
-
Wear goggles when cleaning the machine.
-
Handle your device carefully and out of reach of the children.
-
Have your tool repaired by a qualified person. This power tool complies with the applicable
safety standards. Repairs should be performed only by qualified persons using original spare parts,
otherwise this may make the use extremely dangerous.
-
Use only the blade recommended by the manufacturer for this model. If a blade is damaged, it
must only be repaired by the manufacturer or qualified persons.
-
Use only well-sharpened, crack-free and not distorted blades.
-
Use only blades that comply with the European standard EN 847-1.
-
Ensure that there are no tools or other materials on or in the machine before putting it into
operation.
-
Exchange immediately rocker that run out.
Before and after each use
-
Maintain and check the blade
-
Make the air vents are never obstructed by debris or accumulation of other objects, as this may
12